Funny Wedding Announcements Wordings

Sharpening

Sharp:

A knife does not cut or puncture is a knife?
I'd say it's a good question and opens thousands of questions, especially if the knives are knives and art are art-shaped knife.

But we'll leave that for another discussion now let's talk a bit about sharpening knife, sections of leaves and some tips to make the cut.

That is sharpening a knife?
is to bring the thickness of the sheet to the minimum possible this way we achieve a smooth surface and sharp.
The knife should cut?
must be efficient for the task for which it was created. Ie n or is the same as a capo or camping knife, a cuereador, a machete.
They all have different purposes and therefore different edge claims.
I need to sharpen a knife?
Depending on the state in which the sheet or receive, we need a coarse-grained stone 80 (ideally a diamond), or natural fine na, leather, or sole, and oil to lubricate the stones. We may also use sandpaper of different grain, you can use water instead of oil (depending on the stone), there are steels that are very useful, and polishing paste.

As that edge I'm giving my knife?
The edge sharpness is given by the angle at which work on the stone. That is a lot of practice, guided the angles shown in the chart.


The idea is to keep the same angle over the entire surface of the edge and support the highest leaf on the stone. We'll
circular motion while moving the stone to get the entire edge is even. is very important to lubricate it with water or oil stone. This means that the movement is smoother and remove the remains of the stone we hewn steel.
Once we make the first pass over the coarse stone to the finest pass to get to the point stone finest we have.
Once we get a good edge with stones we leather, this item will make matching a cutting edge offering spectacular. We support the blade flat on the leather and making a move bring the sheet. This operation must be done many times and where possible adding polishing paste to do it.

The leaves have a convex section is ideal to use sandpaper on leather. Thus we have a good backup to copy the convex shape of the leaf.
The procedure is very similar established that of leather, nothing else that you see between the leather and sandpaper leaf that anger is a refinement of the face until desired sharpness. Try not to use the thicker sandpaper 400 grit.